Chi Tiết Sản Phẩm

MÁY ĐẾM HẠT TRONG CHẤT LỎNG

PAMAS 4132

The PAMAS 4132 is used as a particle counting system for Single & Multi­pass Filter test rigs. The standard system fits in the test rigs of filter manu­fac­turers.

In case of a Single Pass Filter Test, the liquid passes the filter only once and then is devi­ated to the outflow. For ß-ratio-ana­lyses, the Single Pass Filter Test can be performed with two PAMAS 4132 instru­ments.

Two PAMAS 4132 instru­ments - equipped with 32 size chan­nels each - are also used for the Multi­pass Filter Test. This test rig with two particle coun­ters allows simul­tan­eous upstream and down­stream meas­ure­ments. For the Multi­pass Filter Test, the liquid flows continu­ously through the system.

The particle counting system PAMAS 4132 analyses liquids of various viscosity degrees (e.g. oil, fuel, water, etc.). The system is adapt­able to any Multi­pass applic­a­tion and ß-ratio analys

Volumetric particle sensors

PAMAS HCB-LD-50/50
Calib­ra­tion range:

  • 1 - 400 μm according to ISO 21501
  • 1 - 100 μm according to ISO 4402
  • 4 - 70 μm(c) according to ISO 11171

Max. particle concen­tra­tion: 24,000 p/ml at a flow rate of 25 ml/min

PAMAS HCB-LD-25/25
Calib­ra­tion range:

  • 1 - 200 μm according to ISO 21501
  • 1 - 100 μm according to ISO 4402
  • 4 - 70 μm(c) according to ISO 11171

Max. particle concen­tra­tion: 120,000 p/ml at a flow rate of 25 ml/min

PAMAS 4132

PAMAS 4132

The PAMAS 4132 is used as a particle counting system for Single & Multipass Filter test rigs. The standard system fits in the test rigs of filter manufacturers.

In case of a Single Pass Filter Test, the liquid passes the filter only once and then is deviated to the outflow. For ß-ratio-analyses, the Single Pass Filter Test can be performed with two PAMAS 4132 instruments.

Two PAMAS 4132 instruments - equipped with 32 size channels each - are also used for the Multipass Filter Test. This test rig with two particle counters allows simultaneous upstream and downstream measurements. For the Multipass Filter Test, the liquid flows continuously through the system.

The particle counting system PAMAS 4132 analyses liquids of various viscosity degrees (e.g. oil, fuel, water, etc.). The system is adaptable to any Multipass application and ß-ratio analysis.

 

Volumetric particle sensors

PAMAS HCB-LD-50/50
Calibration range:

  • 1 - 400 μm according to ISO 21501
  • 1 - 100 μm according to ISO 4402
  • 4 - 70 μm(c) according to ISO 11171

Max. particle concentration: 24,000 p/ml at a flow rate of 25 ml/min

PAMAS HCB-LD-25/25
Calibration range:

  • 1 - 200 μm according to ISO 21501
  • 1 - 100 μm according to ISO 4402
  • 4 - 70 μm(c) according to ISO 11171

Max. particle concentration: 120,000 p/ml at a flow rate of 25 ml/min

download

DOWNLOAD BROCHURE

 

Tin tức & Sự kiện